Professional Wireless Weather Station Anemometer Out Wind Speed Direction Sensor Digital Wind Chill Temperature Humidity Meter

Professional Wireless Weather Station Anemometer With Wind Speed Direction Sensor Digital Wind Chill Temperature Humidity Meter

Description:

Thank you for purchasing the Digital Wireless Weather Station with Dual Mount Wind Sensor. This state-of-the-art measurement instrument is engineered and designed to meet the highest quality standards…to assure you of uncompromising
This instrument will provide measurements of wind speed & direction, wind chill, temperature&humidity.

Specification:

Indoor/outdoor temperature display. Display units options:ºF / ºC(user setting).
Indoor temperature range: 32°F to 122°F (0°C to 50°C);
Outdoor Temperature range:
Alkaline batteries: -4°F to 140°F (-20°C to 60°C)
Lithium batteries: -40°F to 140°F (-40°C to 60°C);
Resolution (for both indoor/outdoor temperature): ±2°F/±1ºC
Temperature accuracy: ±2°F/±1ºC
Humidity range: 20% to 90%
Humidity accuracy:±5%
Receiver: Alkaline battery: 2 AAA 1.5V
Wind Gauge Remote Sensor: Alkaline battery: 2 AA 1.5V or AA lithium battery(Not Included)
Battery life: 12 months (Approx.)
Station dimension: 20.5” height x 9” diameter
Receiver dimensions: 4.9” height x 2.7” width x
Display dimension: 2.36” height x 1.77” width
Perpetual Calendar:
The hour display format can be set between 12
hour format or 24 hour format.
The time zone can be set from-12 to +12(user setting).
Daylight saving time is adjusted automatically (The daylight saving time is adjusted on the basis of different time zone).
The date display format can be set as: YYYY-MM-DD, MM-DD- YYYY,DD-MM-YYYY (user setting).
Wireless 433 MHZ receiving. Available distance: 328 ft in open field.
While receiving RF, press any key to quit.
Indoor/outdoor relative humidity (RH %) display. Display range: 20% to 99%. Resolution: 5%.
Wind-chill temperature display. Display units options: ºF / ºC (user setting).
Dew-point temperature display. Display units options: ºF / ºC (user setting).
Wind speed and wind direction display. Average wind speed and gusts display. The units can be set as m/s,km/h,mph,knots or bft (user setting). Wind speed range: 0 to 50 m/s; Wind direction range:E,S,W,N,SE,NE,SW,NW.
All maximum/minimum data can be recorded and displayed. In addition, the time of recorded data can be displayed as well.
The weather alarm can be set separately, any value can be set. The alarm signal lasts 2 minutes.

Troubleshooting:

The wind speed, outdoor temperature, and humidity will all display dashes if the receiver doesn’t receive a signal from a remote unit channel for ten minutes. To solve this issue:
1. Check that the unit is correctly positioned and within the designated broadcast range by going to the remote location of that channel.
2. Replace any defective replacement batteries with new ones after the initial installation. The batteries have lost their charge if you were not aware of the Low Battery symbol warning and the device worked as intended after initial setup. Put fresh batteries in.
3. Make sure there are no obstructions or interference in the transmission path.

Use & Care:

1. Only indoor use is intended for the home receiver. If used outside, it can become damaged because it is not waterproof.
Avoid submerging the receiver in water. If you accidentally spill something on it, quickly dry it with a soft, lint-free cloth.
3. The Wind Gauge Remote Sensor is not waterproof but is weather resistant. Never submerge it in water or let snow build up on it. If this happens unintentionally, dry it right away with a gentle, lint-free cloth.
4. Despite being weather-resistant, the Wind Gauge Remote Sensor shouldn’t be kept outside during severe weather. Move the transmitter temporarily indoors if these circumstances start to seem possible. If not, long-term harm to the sensor’s internal circuitry or external wind vane may occur.
5. Do not mount the Wind Gauge Remote Sensor on a metal surface.
6. Do not subject the Wind Gauge Remote Sensor to extremely severe temperatures.
7. Avoid using corrosive or abrasive cleaning agents on either unit. This could corrode electronic circuitry and damage plastic components.
8. Avoid applying excessive force, shock, dust, heat, or humidity to either device. This could lead to malfunction, a lower lifespan for electronics, a damaged battery, or warped parts.
9. Avoid tampering with the internal parts of either device. This could result in damage and void the warranty on the item. There are no consumable components in the device.
10. Avoid combining fresh and used batteries. Never burn off batteries for disposal. Batteries could leak or blow up. Alkaline, carbon zinc (standard), and nickel-cadmium (rechargeable) batteries should not be combined. If the devices won’t be used for a while, remove the batteries.
11. Always read the instruction manual before operating this product.

Important:

Though the Wind Gauge Remote Sensor is weather-resistant,it should never be submerged in water. If extreme weather conditions are likely to occur, temporarily move the transmitter to an indoor area for protection.

Package List:

1xWind Speed Weather Station(Battery Not Included)
1x User Manual