Tuya Smart Temperature And Humidity Sensor APP Remote Monitor For Smart Home SmartLife Work With Alexa Google Assistant WiFi

Product Features:

1. High precision.
The sensor uses top suppliers. It can guarantee the high precision of the measurement data.

2. Real-time monitoring and recording.
The sensor will report when the temperature and humidity change very little. You can view the changes in the value on the APP or display screen.
Record the temperature and humidity changes on the APP, and use the graphics to show you.

3. Backlight Supported
The sensor has a backlight, it makes your browser screen clear at night.

The lighting of the sensor keeps your browser screen clear at night.

4. Broad field of view
Our LCD screen’s viewing angle is broader than that of other items of a same kind since it was meticulously created.

5. Scene tagging
The sensor can be used as a temperature and humidity data source for Google Home, Amazon Alexa, Tuya Smart, and Smart Life. Depending on the data source, several automated processes are possible.

6. Switch for Temperature Unit
The sensor is built with a Celsius to Fahrenheit temperature display conversion capability. Depending on your requirements, you can select the display unit that is required.

7. Third-party voice support.
The sensor supports Amazon Alexa and Google Home Assistant. You can check the current temperature and humidity by voice.

Product Parameter:

Power supply: Battery LR03-1.5V/AAA*3 (not included)
Backlight: Supported
Wireless: WiFi 2.4GHz IEEE 802.11 b/g/n
Temperature Measure Range: -9.9℃-60℃
Temperature Accuracy: ±1
Humidity Measure Range: 0% RH~99% RH
Humidity Accuracy: ±5% RH

NOTE:

About Displaying

1. The time format cannot be changed.
2. The temperature unit can be switched.

About Bluetooth Function

Only during configuration is the Bluetooth function relevant. The gadget will terminate the Bluetooth network after configuration.

Regarding the frequency of temperature and humidity updates

Using the trigger mechanism, for example, Report the information right away when the change in temperature or humidity approaches the trigger condition. Two minutes is the quickest updating interval. The data is typically updated once per hour.
2. The update frequency cannot be modified by the sensor.
3. The alarm feature is set on the APP; the sensor is unable to set an alarm.
Please purchase a USB-powered version if you require real-time data updating.

About Batteries

1. Only LR03-1.5V alkaline battery can be used (1.2V rechargeable battery may cause the equipment to detect wrong voltage and report low voltage)
2. Different model batteries cannot be combined
3. You can’t combine batteries from different brands.
4. You can’t mix brand-new and used batteries.
5. Avoid utilizing subpar batteries.
If not, there will be either a setting error or excessive battery use.
How to get authentic batteries or high-quality batteries. Over time, kindly purchase them at typical supermarkets or chain stores.
Note: After the device setting is complete, it must be placed in an area with a strong wifi signal; otherwise, connecting to the network will consume more power, which will result in rapid battery consumption.

About Network Testing

The network will consume a lot of power
To ensure the service life of the battery, the sensor will stop using the network when it does not need to report data
Therefore, it is meaningless to test the network signal of sensors in APP.

Error on temperature and humidity

1. All temperature and humidity sensors will have certain errors, please note
The error of this sensor is ± 1 ℃ and the error of humidity is ± 5% RH
Any value within this range is normal
2. Sensor error and manufacturing process will lead to certain errors between products of the same model
3. According to Newton’s third law, the heat conduction takes a certain time.
Therefore, our sensor needs 30 minutes to be consistent with the room temperature, and the measurement will be accurate.

About Historical Curves

1. The minimum granularity of historical data (daily chart) is 1 hour, and the minimum granularity of exported data is also 1 hour
2. Days of historical data are stored for 7 days

3. The average value of historical data, or the average value over a minimum granularity of time, is its value.

support for smart speakers from third parties

1. The temperature and humidity may not be shown as expected on the third-party smart speakers’ APP because they lack control panels that correspond to temperature and humidity sensors (Google Home/Amazon Alexa). However, we have activated the voice search feature.
Consequently, it is possible to voice-request the current temperature and humidity.
2. Third-party smart speakers cannot construct a route or automatic procedure connected to temperature and humidity
3. Yandex Alice is not supported by the device.

About Automation
The sensor uses the principle of Edge Triggered
That is, the action can only be triggered if the condition crosses the set condition
For example, when the automatic setting temperature is greater than 25 ℃, then turn on the air conditioner.
1. When the temperature rises from below 25 ℃ to 25 ℃, the automatic process can trigger to start off the air conditioner

2. The temperature remains consistently above 25 °C once the automatic process is set, and the air conditioner is not used.
3. The automatic operation will start when the temperature falls to or climbs above 25 °C.

For instance, turn on the air conditioner 1 when the automated preset temperature is lower than 20 °C. The air conditioner may start automatically when the temperature lowers from over 20 °C to 20 °C. The temperature is always below 20 °C once the automatic procedure is set, and the air conditioner is not activated 3. The automatic process will start when the temperature climbs to 20 °C and then reduces to over 20 °C.

APP Remote Monitor

When the sensor is registered to the APP and connected to the Internet, you can monitor the temperature and humidity of the room in real-time anywhere in the world.

Backlight Supported

When you touch the reset button once, the backlight will be triggered, and it will last for about 10 seconds.

Accurate Measurement

NOTE:
After configuration, it will take 30 minutes to be accurate.

Voice Query Supported

The Sensor work with Amazon Alexa and Google Home. You can check temperature and humidity by voice.

Application Scenarios

You can install the sensor wherever you need it (a WiFi connection network is required).

Intelligent Linkage

In the APP, you can make linkage settings by setting the temperature and humidity of the sensor as conditions. It will make your life more comfortable.

APP Pages

The page could get better.