Zigbee 3.0 RGB+CCT LED Floodlight Pro 10W 30W 60W Smart Outdoor Light IP65 Waterproof Work with Amazon Echo Plus

Zigbee 3.0 RGB+CCT LED Floodlight Pro 10W 30W 60W 100w Smart Outdoor Light IP65 Waterproof Work with Amazon Echo Plus SmartThing

Thanks for buying our products.
In this manual, we will explain the connection of wires and the connection with a ZigBee Light
Link Gateway.
These devices work with many ZigBee Light Link Gateways

Wire Connection:
1. Please prepare the cable like in picture P1 and strip the isolation to 9-10 mm. The cable
cross-section must be between 0,33 and 2,08mm⊃2;(AWG22-14).
2. Now push down the terminal with a screwdriver and put in the cable, see picture P2.
3. Take the screwdriver away and the cable is connected to the terminal.
In pictures P3-P7 you can see examples of the connection of different LED controllers:
– P3 for RGBW/RGBWW products
– P4 for RGB products, use an RGBW controller and don’t connect the wire W
– P5 for single color LED product, use an RGBW controller and don’t connect the wire
R, G, B
– P6 for RGB+CCT(warmwhite+coldwhite) products
– P7 for CCT(warmwhite+coldwhite) products
Connection with Gateway:
1. See the “wire connection” section to connect the LED product to the controller.
2. Begin the device’s ZigBee Light Link Gateway search; this could take some time.
Plug the power in and out or do a reset if the Gateway cannot detect the device.
3. The Gateway located your device, which you may now allocate to the various zones, groups, and rooms.
4. You can now utilise the gadget.
Reset:
1. Turn on your gadget.
2. Now, turn on and off in under two seconds.
3. Repeat four repetitions, off/on.
4. The gadget is reset when it is turned on for the fifth time and the light remains on after four blinks.

*For RGBW/RGBWW devices you will find two SSIDs. One for white/warm white, the other
for RGB.